This is a searchable and updated list of all commands for Ark. Press the Tab key to open the command console on PC. On Xbox, press LBRBXand Y at the same time. On PlayStation, press L1R1Square and Triangle at the same time.
Command syntax:
AddEquipmentDurability {Amount}This command will add the specified amount of durability, energy, and water to equipped armor and items in the hotbar.
Command syntax:
AddExperience {HowMuch} {FromTribeShare} {PreventSharingWithTribe}This command wil add the specified amount of experience points to you, or to your mounted dino if you are currently mounted. If you want to give another player experience, use the command GiveExpToPlayer.
Command syntax:
ClearPlayerInventory {PlayerID} {ClearInventory} {ClearSlotItems} {ClearEquippedItems}This command will clear the specified player's equipped items, slot items, and or inventory.
Command syntax:
CopyCoordsToClipboardThis command will copy your current geo coordinates and rotation to your clipboard. It will be in the form X, Y, Z, Yaw, Pitch.
Command syntax:
DefeatAllBosses {PlayerID}This command will unlock all bosses of alpha quality. If you want to unlock all bosses with a difficulty of 2, use the command DefeatBoss.
Command syntax:
DestroyTribeStructuresAll structures of the tribe of the current player, dino, or structure you are looking at will be instantly killed.
Command syntax:
DestroyTribeStructuresLessThan {TribeID} {Connections}This command will instantly destroy all structures owned by the specified tribe that have fewer connections than specified. Connections are snapped structures.
Command syntax:
Dino DontHideRiderDuringBlinkThis command will prevent any interference with rider visibility when the Enforcer blinks. This allows the HideRiders command to work.
Command syntax:
Dino ResetThis command will reset all blink cool downs if you are looking at or riding an Enforcer. If you are looking at or riding a Mek, this command will reset fuel to 100% and heat to 0.
Command syntax:
DinoSet UpkeepInterval {Seconds}This command will set the Mek's interval to the specified number of seconds. The rate of fuel and health loss will be unaffected.
Command syntax:
DoTameThis command will tame the creature you are looking at, if the creature is able to be tamed. This is similar to the command ForceTame.
Command syntax:
EnableCheats {Password}This command enables server administrator commands. The password is the server administrator password. This command is not needed when playing single player games.
Command syntax:
EnableSpectatorThis command will set the game mode to spectator and will destroy your inventory. It is recommended that you leave all of your inventory at a safe place. To leave the spectator mode use the command StopSpectating.
Command syntax:
ForcePlayerToJoinTargetTribe {PlayerID}This command willl make the target player join your tribe. You can use this command's shortcut command, which is ForceJoinTribe.
Command syntax:
ForceTameAOE {Radius}This command will tame all dinosaurs within the specified radius. The radius is an optional parameter and if not provided, will default to 2000.
Command syntax:
ForceTribes {PlayerName1} {PlayerName2} {NewTribeName}This command will make the two specified players part of a new tribe, with the specified name.
Command syntax:
GFI {Blueprint path part} {Quantity} {Quality} {Force blueprint}This command will add the specified item, or its blueprint if Force blueprint is set to Force blueprint to your inventory. The is a popular command used for spawning items. A list of all blueprint path parts can be found here.
Command syntax:
GMBuffThis command will activate multiple commands including God, InfiniteStats, Enemy Invisible true, and will give you some experience points.
Command syntax:
GetAllState {Type}This command will output all entities of a given type to the server console and will save this to a server log file called "ShooterGamer.log."
Command syntax:
GetGameLogThis command will return the game log, 100 entries at a time. The entries will also be saved to a file in "\Logs." To enable this command, launch the server with the command -servergamelog.
Command syntax:
GetTribeIDPlayerList {TribeID}This command will print out a list of all players from the specified tribe. Player IDs and Steam IDs will be printed to the console and in an in-game chat window.
Command syntax:
GhostThis command enables No Clip Mode, which lets you walk through objects and terrain. To disable No Clip Mode, use the command walk.
Command syntax:
GiveDinoSet {Tier} {Quantity}This command will give you a set of dinos in the specified tier, along with saddles. Tier is a required parameter.
Command syntax:
GiveExpToPlayer {PlayerID} {ExperiencePoints} {FromTribeShare} {PreventSharingWithTribe}This command will give the specified player the specified number of experience points. If you want to give experience to yourself, use the AddExperience command.
Command syntax:
GiveExpToTarget {Amount} {FromTribeShare} {PreventSharingWithTribe}This command will add experience to the player or dino you are looking at.
Command syntax:
GiveItem {BlueprintPath} {Quantity} {Quality} {ForceBlueprint}This command will give you the specified item in the specified quantity and with the specified quality. You can also use the command GFI or GiveItemNum
Command syntax:
GiveItemNum {ItemNum} {Quantity} {Quality} {ForceBlueprint}This command will give you the specified item (or its blueprint) in the specified quantity and with the specified quality. This command is similar to the GFI command.
Command syntax:
GiveItemNumToPlayer {PlayerID} {ItemNum} {Quantity} {Quality} {ForceBlueprint}This command will give the specified player the specified item (or its blueprint) in the specified quantity and with the specified quality. This command is similar to the GFI command.
Command syntax:
GiveItemToPlayer {PlayerID} {BlueprintPath} {Quantity} {Quality} {ForceBlueprint}This command will give to the specified player, the specified item in the specified quantity and with the specified quality.
Command syntax:
GiveResourcesThis command will add 50 unites of each resource to your inventory. This will end up being around 300+ units of weight in total.
Command syntax:
GiveSlotItemNum {ItemID} {SlotNumber} {Quantity}This command will add the specified item into one of your item slots. You can use the command GiveSlotItem if you want to reference the item's blueprint path instead of item number.
Command syntax:
GiveWeaponSet {Tier} {Quality}This command will give you all the weapons in the specified tier as well as the ammo needed. Tier is a required parameter.
Command syntax:
GodThis command toggles God mode, which makes you invincible. You will not suffer any damage from attacks, explosions, or falling. You can, however, still die by drowning. If you want to prevent death from drowning, activate the command InfiniteStats. To disable God mode, enter this command again.
Command syntax:
HatchEggThis command will set the egg's incubating progress to 0%. You will still need the right temperature to make the egg hatch. If the temperature is not right, the egg will have a broken icon and you will not be able to consume it.
Command syntax:
InfiniteStatsThis command will refill your stamina, health, oxygen, food, and water instantly and will keep all these stats at 100%. Note that if you are mounted on a dino, this command will apply only to your dino and not to you. To make yourself the target of this command, make sure you are unmounted. In addition, no ammo is consumed when you fire weapons. This command does not make you invincible. Use the command God to become invincible.
Command syntax:
KillThis command will immediately kill the targeted dinosaur or structure. To kill bosses, you may need to enter this command multiple times. A corpse will be left behind. Use the command {DestroyMyTarget} to kill target without leaving behind a corpse.
Command syntax:
KillAOE {Category} {Radius}This command will kill All entities of the specified type within the specified radius. The radius defaults to 2000 if it is not specified.
Command syntax:
LevelUp {StatName} {NumLevels}This command will level up your stat or the dino you are riding, if you are riding a dino. XP will be automatically added.
Command syntax:
LevelUpAOE {StatName} {Radius} {NumLevels}This command will level up the specified stat of all nearby players and dinos in the specified radius. XP will be automatically added.
Command syntax:
LevelUpTarget {StatName} {NumLevels}This command will level up the specified stat for your targeted dino or player. XP will be automatically added.
Command syntax:
Open {IP:Port}This command will make you join the server at the specified IP. If the IP does not work, use the domain name. If a password is needed, use the syntax IP:Port?Password.
Command syntax:
PlayersOnlyThis command will stop all creature movement and will stop all crafting. Players can still move around normally. Enter the command again to start creature movement and crafting.
Command syntax:
RefillStatsThis command will set all stats to 100%. This command will only do this once. If you want the stats to stay at 100%, use the command InfiniteStats.
Command syntax:
RequestSpectator {Password}This command requests spectator mode on servers. The password entered must match the server's "Spectator Password."
Command syntax:
SPI {x} {y} {z} {yaw} {pitch}This command is the same as the command {SetPlayerPos}, but it also allows you to set a yaw and pitch to adjust the view.
Command syntax:
SaveWorldThis command will make the server save the game world. If you are in single player mode, the game world will be saved locally.
Command syntax:
ServerChatToPlayer {PlayerName} {MessageText}This command will send a private chat message to the specified player based on their Steam name.
Command syntax:
SetCheatPlayer {true or false}This command will enable cheat commands that affect the game world, mounted dinosaurs, and the current player.
Command syntax:
SetImprintedPlayer "{NewImprinterName}"{PlayerID}This command will change the imprinted player of the dino you are looking at to the specified player.
Command syntax:
SetTimeOfDay {Hour}:{Minute}:{Second}This command will set the game world's time to the specified time. Note that the time is set using military time or a 24 hour time.
Command syntax:
SpawnActorSpread {BlueprintPath} {SpawnDistance} {SpawnYOffset} {ZOffset} {NumberActors} {SpreadAmount}This command will spawn the specified number of creatures in the specified area.
Command syntax:
SpawnSetupDino {BlueprintPath} {SaddleBlueprintPath} {SaddleQuality} {DinoLevel} {DinoStats} {SpawnDistance} {YOffset} {ZOffset}This command will spawn the specified dino with the specified saddle, level, and base stats.
Command syntax:
TakeTribe {TribeID}This command will make you the owner of the specified tribe's dinos and structures. {TribeID} is optional. If it is not specified, the target tribe will be the tribe of whatever you are looking at.
Command syntax:
TeleportPlayerIDToMe {PlayerID}This command will teleport the specified player to you. To teleport yourself to another player, use the command {TeleportToPlayer}. If you want to specify another player by their player name instead of their player ID, use the command {TeleportPlayerNameToMe}.
Command syntax:
TeleportPlayerNameToMe {PlayerName}This command will teleport the specified player to you. To teleport yourself to another player, use the command {TeleportToPlayer}.
Command syntax:
TeleportToPlayer {PlayerID}This command will teleport you to the specified player. TTo teleport the other player to you, use the command TeleportPlayerIDToMe or TeleportPlayerNameToMe.
Command syntax:
TeleportToPlayerName {PlayerName}This command will teleport you to the specified player. To teleport the other player to you, use the command TeleportPlayerIDToMe or TeleportPlayerNameToMe.
Command syntax:
TransferImprints {oldPlayerID} {newPlayerID} {NewImprinterName}This console command transfers all of a player's imprinted dinos to another player.